EN 13432 EN13432 compostable bags

DIN BS:EN 13432
"Packaging – Requirements for packaging recoverable through composting
and biodegradation.

Plastic products can provide proof of their compostability by successfully meeting the harmonised European standard, EN 13432. The European Packaging Directive 94/62 EC makes reference hereto with regard to compliance with recovery directives.

images Show Biodegradation ©BASF

Today, the terms biodegradation, biodegradable materials, Compostability, etc. are very common, but frequently misused, and are, consequently, a source of misunderstanding. The European norm EN 13432 "Requirements for packaging recoverable through composting and biodegradation - "Testing scheme and evaluation criteria for the final acceptance of packaging", which has also been recently adopted in Italy, as EN 13432, resolves this problem by defining the characteristics that a material must have in order to be defined as "Compostable". This norm is a reference point for material manufacturers, public authorities, composters and consumers.
According to EN 13432, a Compostable material must have the following characteristics:

Biodegradability, which is determined by measuring the actual metabolic conversion of the compostable material into carbon dioxide. This property is quantitatively measured using the standard test method, EN 14046 (which is also published as ISO 14855: biodegradability under controlled composting conditions). The acceptance level is 90%, which must be reached in less than 6 months.

Disintegrability, that is, the fragmentation and loss of visibility in the final compost (absence of visual contamination). This is measured with a composting test (EN 14045). The test material is degraded, together with organic waste, for 3 months. After this time, the compost is sieved with a 2 mm sieve. The residues of test material with dimensions higher than 2 mm are considered as not having disintegrated. This fraction must be less than 10% of the initial mass.

Absence of negative effects on the composting process. This is checked with a composting test.

Low levels of heavy metals (below the predefined maximum values), and absence of negative effects on the quality of the compost (e.g. reduction of the agronomic value and presence of eco-toxicological effects on the growth of plants). A plant growth test (OECD test 208, modified) is carried out on compost samples where the degradation of the test material has taken place. There must be no difference from a control compost. Other chemical-physical parameters that must not be different from those of the control compost after the degradation are the pH, salinity, volatile solids, N, P, Mg, K.

Scope of testing under EN 13432

Chemical test: Disclosure of all constituents, threshold values for heavy metals are to be adhered to.
Biodegradability in watery medium (oxygen consumption and production of CO₂): Proof must be made that at least 90% of the organic material is converted into CO₂ within 6 months.
Disintegration in compost: After 3 months’ composting and subsequent sifting through a 2 mm sieve, no more than 10% residue may remain, as compared to the original mass.
Practical test of Compostability in a semi-industrial (or industrial) composting facility: No negative influence on the composting process is permitted.
Compost application: Examination of the effect of resultant compost on plant growth(agronomic test), ecotoxicity test.

Each of these points is necessary for the definition of compostability, but these alone are not sufficient. For example, a biodegradable material is not necessarily Compostable because it must also break up during one composting cycle. On the other hand, a material that breaks up, over one composting cycle, into microscopic pieces that are not totally biodegradable, is not Compostable. OXO degradable materials fall into this category, and are also toxic with a Cobalt 13 additive.

The EN 13432 norm is a harmonised norm, that is, it has been published in the Official Gazette of the European Community, and, consequently, must be adopted by every European country. The norm provides an assumption that packaging and waste from packaging conform with the European Directive 94/62 EC.

"Mater-Bi® contains vegetable origin components, such as starch, +
biodegradable polyesters and therefore it contributes to the decrease of
emissions of fossil based CO2 in the atmosphere."

Back to compostables main page
Back to Mater Bi details